eng ar home eng ar  
Home Maintenance
 
 

 

 

 

 

Combined Lift/Shuttle Systems

 

This type of plant is able to perform one movement at a time:
             - during the vertical motion the shuttle rests of the elevator;
             - after reaching the parking floor the shuttle slides out of the
               lift and travels in front of the parking place.
 

According to the available space the handling of the cars can be made with the integral lift trolley (cars stored in 90°angle to the shuttle lane), or with pallets (cars parked in the same axle of the shuttle lane) Both solutions allow to store the cars in single or double rows.


Each mechanism is able to serve between
10 and 50 car places and is best suited for small to medium parking for private use.

The following models belong to this family:

 

 


Pozzopark L2,L3,L4

 

It is the most elementary form of mechanical parking, consisting of one rack & pinion elevator and a pallet knock out system which shifts the pallet sidewards on single or twin rows on each side of the elevator (from 2 to 4 car places per floor).
  

 


Carpark T1e, T1s

 

 

 

 

It consists of a lift with rope, chain or rack & pinion hoisting device depending on the parking height, which carries one shuttle on board. The CARPARK T1 can have the entry/exit room placed directly on top of the elevator, or use a secondary lift to connect the entry/exit room to the first parking level where the main elevator operates connecting all the parking floors. 

The entry/exit room can be fixed, disappearing and/or have a turntable according to the needs.
System can handle cars in single, double or triple bay.

In particular cases (maximum exploitation of a
very high or very deep plant) its possible that the shuttle runs on the edge of the parking slabs, avoiding the construction of the central shuttle concrete slab, thus saving 30 cm on the height of each floor.
 

 

 

Carpark L1

 

CARPARK L1

 

 

It consists of a rack & pinion lift which carries one shuttle on board. The shifting of the cars is performed by means of pallets which are placed in the same axle of the shuttle lane, in single or double bay.

The access to the system is similar to those described for the CARPARK T1.
 

 

 

 

 

Products

Traslo Elevators

   » Traspark TM

   » Traspark LB

   » Pozzopark C

Combined Lift

   » Pozzopark

   » Carpark T1 e T1s

   » Carpark L1

Multi lift / Multi Shuttle

Recirculation Plants

 

 

Our Targets

Car Safety

Secure Parking

Reserving Land

Provide systems around the UAE

Save users time

Green Environment

 


Our European Collaborators

 

Contact Us

Telephone: +971 2 622 8000

Fax: +971 2 622 8444

P.O.Box: 59565

Abu Dhabi, Corniche St.

United Arab Emirates